Led светильник лунное сияние 100W 3000К–6000К IP20 без пульта
100 Вт · 3000/4000/6000 K · 180–240 В
UAH 2,595In stock
Solutions · residential
Flats, houses, residential complexes. From the switchboard to the switch.
Switchboard equipment and automation, cable, sockets and switches in one series, light for every room, façade and yard lighting, backup for power cuts — for private sites, renovation crews and developers.
- typical socket circuit, copper
- C16 · 2.5 mm²
- typical lighting circuit, copper
- 10 A · 1.5 mm²
- RCD for bathroom, kitchen and outdoors
- 30 mA
What matters
Electrics are planned from the switchboard, lighting in layers.
Each group gets its own circuit, with a breaker sized to the cable cross-section, not to the appliance power: the breaker protects the cable. Bathroom, kitchen and outdoor circuits go through a 30 mA RCD. Sockets, switches and frames are best taken from one series for the whole site — that makes adding and replacing pieces easier.
Lighting in a room is planned in layers: general, task and accent. In the kitchen the work area above the worktop is lit by a separate circuit — strip in a profile or a linear luminaire under the cabinets.
- Sockets C16 and 2.5 mm² copper
- Lighting 10 A and 1.5 mm² copper
- Wet areas 30 mA RCD
- Kitchen a separate lighting circuit above the worktop
What we supply
Everything for residential electrics and lighting.
Switchboard and automation
Circuit breakers, RCDs, voltage relays, consumer units — for the circuits of a flat or house.
Cable and installation
ShVVP, PVS, corrugated conduit, junction boxes and terminals.
Sockets and switches
Series with frames, weatherproof accessories for the bathroom and outdoors.
Light for rooms
Chandeliers, downlights, wall lights and kitchen luminaires.
Accent lighting
LED strip in profile, power supplies, controls.
Backup for power cuts
“Inverter + battery” kits for the boiler, router and lighting.
Engineering calculation
Which breaker and cable the line needs
Enter the power, supply and line length to get the design current, breaker rating, copper cable cross-section and voltage drop.
Indicative: copper in a wall or conduit, cos φ 0.95, C characteristic, voltage drop up to 5% for power circuits and up to 3% for lighting. The final choice follows the project and the wiring regulations (PUE), allowing for the installation method and temperature.
How to size a breaker and cableCurrent0 A
BreakerC16
Copper cable3×2,5 mm²
Voltage drop0 %
Above 125 A this is a service entrance or a main feeder. Send us the parameters and we will specify equipment for the project.
Light for the home
Interior lighting.
Квадратная led люстра с хрусталем 280Вт 60×60 см 3200-6000К IP20 с пультом
280 Вт · 3200/4100/6000 K · 220 В
UAH 6,865In stock
Подвесная квадратная хрустальная led люстра 70Вт*2 3200–6000K IP20 хром с пультом
70 Вт · 3200–6000 K · 220–240 В
UAH 5,274In stock
UALED
Светодиодная подсветка на зеркало врезная E27 IP20 10шт ручной выключатель, белый цвет
220 В · IP20 · E27
UAH 876In stock
Зеркало в ванную с подсветкой 6000-6500К Холодный белый 800×800 механический выключатель
6000–6500 K · 12 В
UAH 4,706In stock
Зеркало с подсветкой скругленное 6000-6500К Холодный белый 800×600 сенсорный выключатель
6000–6500 K · 12 В
UAH 7,013In stock
Круглое зеркало с подсветкой 6000-6500К Холодный белый 750×750 механический выключатель
6000–6500 K · 12 В
UAH 5,139In stock
Feron
Светодиодный светильник накладной ML174 черный под лампу GU10
175–265 В · IP20 · GU10
UAH 300In stock
Люстра светодиодная двухуровневая хрустальная 140Вт 3000-6000K IP20 без пульта
140 Вт · 3000/4000/6000 K · 220 В
UAH 10,297In stock
Мощная хрустальная led люстра 50×50см 220Вт 3200-6000К IP20 с пультом
220 Вт · 3200/4100/6000 K · 220 В
UAH 6,028In stock
LED Story
Светильник с пультом 70Вт светодиодный 6650лм Ø485мм Звездное небо 3000-6500K с регулировкой яркости IP40
70 Вт · 3000–6500 K · 220 В
UAH 1,068In stock
Потолочный LED светильник 50 Вт с регулировкой света 3000K/4000K/6000K 30 см
50 Вт · 3000/4000/6000 K · 180–265 В
UAH 1,758In stock
Questions
About residential electrics.
Which breaker goes on a socket circuit?
Usually C16 on a 2.5 mm² copper circuit. The rating is chosen for the cable cross-section, not the appliance power — the calculator above will check your circuit.
Where is an RCD needed?
On the bathroom, kitchen and outdoor circuits and on all sockets where contact with water is possible: a 30 mA RCD disconnects the circuit if current leaks.
Do you work with renovation crews and developers?
Yes. We kit out a site to specification in batches and ship to your warehouse or site, with an invoice for your accounts.
Enquiry